Frequently asked questions
Straight answers on attic rain, insulation, warranties and how we work. Can’t find yours? Call us.
General
Is the assessment free?
Yes. The on-site assessment, including thermal imaging, is free, and comes with a fixed-price written quote. There is no obligation.
What areas do you serve?
Calgary, Airdrie, Cochrane, Chestermere, Okotoks and surrounding communities. If you are nearby and not sure, call us.
What warranties do you offer?
A lifetime warranty against attic rain on repairs, and a lifetime labour warranty on all insulation work. See warranty details.
How do I book?
Use our online request form or call (368) 886-0321. We confirm a time and send a short pre-visit checklist.
Do you provide photos of the work?
Yes. We document every stage of the job and send you the photos, including work that will be covered by insulation or drywall.
Are you insured?
Yes. Our technicians are trained and insured.
Attic rain
Isn’t attic rain a roof ventilation problem?
Attic rain is a moisture problem first. Ventilation helps remove moisture, but if warm air keeps leaking into the attic, more vents alone will not stop it. We regularly repair attics where ventilation was added more than once without solving the problem.
How can I tell attic rain from a roof leak?
A stain in one location is more likely a roof leak. Stains in several places — or around bathroom fans, pot lights and the attic hatch — point to attic rain, especially if they appear after a cold snap followed by a warm spell. In the attic, frost on the sheathing and rusted nail tips confirm it.
Will topping up my insulation fix attic rain?
Not on its own. Extra insulation can temporarily hide the problem while moist air continues to leak in, and it adds cost to the proper repair later. Air sealing has to come first.
The drip only happened once. Is the problem gone?
Usually not. Moisture accumulates in the attic several times each winter whether or not it reaches the ceiling. The effects are cumulative — wet insulation, mould and damage to sheathing — so it is worth diagnosing even after a single event.
Is attic rain covered by home insurance?
Generally no; insurers typically treat it as a maintenance or construction issue. In some cases resulting damage has been partly covered. Check your policy, and see our guide to insurance and attic rain.
My home is fairly new. Is it covered by the new home warranty?
It may be. Alberta’s new home warranty includes building envelope coverage for the first years of ownership, and attic rain has been treated as an envelope issue. Contact your warranty provider before the coverage period ends — we can document the cause for your claim.
Is attic rain the responsibility of my condo board?
Often the attic is common property, so start with your board. With your permission we are happy to contact them and check whether other units are affected.
How much does attic rain repair cost?
It depends on how many bypasses need sealing, the condition of the insulation and the ventilation work required. After the free assessment you receive a fixed price in writing.
Can attic rain cause mould?
Yes. Repeated wetting of sheathing, framing and insulation creates conditions for mould growth. Our inspection includes moisture readings to show whether wood is compromised.
Why does water come out of my bathroom fan?
Usually because warm air is leaking around the fan housing or the duct is poorly connected or routed. Moisture freezes in the attic and drains back through the fan when it melts.
Why do my pot lights drip in winter?
Recessed lights are among the largest holes in the ceiling air barrier. Warm air escapes around them, frost forms above, and the melt returns through the same opening.
Does attic rain happen in other parts of Canada?
Yes. It is especially common in Calgary because of rapid Chinook temperature swings, but attic moisture problems occur across the country.
Should I call a roofer first?
If staining appears after a cold snap followed by warm weather, and in more than one location, attic rain is the more likely cause. A roofing repair will not stop it.
How much attic ventilation does my home need?
It is calculated from your insulated ceiling area under the National Building Code, with vent area split between intake at the soffits and exhaust near the ridge. We measure and calculate it during the assessment.
Can an attic have too much ventilation?
Unbalanced ventilation is the bigger risk. Too much exhaust and too little intake can draw conditioned air from the house into the attic, making moisture problems worse.
Will more roof vents stop attic rain?
Not by themselves. If air leakage from the house is the source, extra vents treat the symptom. Attic rain is fixed by sealing the ceiling, restoring insulation and balancing ventilation together.
Where should my bathroom fan vent?
Outside the home, through a dedicated roof or wall termination. A fan that vents into the attic — or a duct that has come loose — puts moisture exactly where it causes damage.
What are baffles and do I need them?
Baffles hold insulation back from the soffit vents so outside air can flow into the attic. If insulation is blocking your eaves, you need them.
Insulation
What R-value should a Calgary attic have?
We recommend R-60. Attics below about R-50 are more prone to heat loss and frost in our experience. See our guide: what R-value does a Calgary attic need?
Should I top up or replace my attic insulation?
If the existing insulation is dry, clean and evenly distributed, topping up is usually the efficient choice. If it is wet, mouldy, heavily compressed or contaminated, it should be removed first. The assessment tells us which applies.
Do you air seal before adding insulation?
Always. Adding insulation over an unsealed ceiling buries the leaks and can make attic moisture problems harder to fix later.
How long does attic insulation take?
Most attic top-ups are completed in a single day. Jobs that include removal or extensive air sealing can take longer; your quote includes the expected schedule.
Do I need to be home during the work?
Someone needs to provide access at the start and for the final walkthrough. We protect the access area and clean up before we leave, and send photo documentation of the work.
How much does attic insulation cost?
Cost depends on attic size, current depth, how much air sealing is needed and whether removal is required. The assessment is free and you receive a fixed price in writing.
What R-value should my walls be?
It depends on wall depth and your project’s requirements. 2×4 walls typically take R-12 to R-14 batts and 2×6 walls R-20 to R-24. For permitted work we match the specification on your plans.
Which side does the vapour barrier go on?
In Alberta’s climate the polyethylene vapour barrier goes on the warm (interior) side of the insulation, directly behind the drywall.
Why does the poly need to be sealed?
Gaps and unsealed laps let warm, moist air into the wall where it can condense on cold surfaces. Sealing laps with acoustical sealant over framing and sealing around boxes keeps the barrier continuous.
Can you insulate walls without removing the drywall?
Batt and poly insulation is installed in open walls. If your walls are closed, we will tell you honestly what is and is not practical during the assessment.
Do I need a permit or inspection?
If the insulation is part of a renovation, addition or basement development that requires a permit, an insulation and vapour barrier inspection is typically part of it. We schedule our work so the assembly is ready before drywall.
Do you work with my contractor?
Yes. We regularly fit into renovation schedules and coordinate directly with general contractors and homeowners.
Is basement insulation worth it?
For most homes, yes — especially if you are developing the space. An uninsulated basement is one of the largest sources of heat loss in a house, and the rim joist alone can account for significant air leakage.
Do I need a vapour barrier in my basement?
For framed, insulated basement walls in Alberta, a continuous vapour barrier on the warm side is standard practice and typically required for permitted developments.
What if my basement has had water in it?
Water problems should be resolved before insulating. We look for signs of moisture during the assessment and will tell you if something needs attention first.
Can you insulate just the rim joists?
Yes. Rim joists are a high-value upgrade on their own, even in an unfinished basement. See rim joist insulation.
Will you work around my basement development schedule?
Yes. We schedule insulation and vapour barrier so you are ready for your inspection and drywall on time.
How much difference does rim joist insulation make?
The rim joist is often the single largest source of air leakage in a basement. Sealing and insulating it typically makes a noticeable difference to drafts and floor comfort, especially at the perimeter of the main floor.
Can I just put a batt in the rim joist cavity?
A batt alone lets air pass through to the cold rim board, which can lead to condensation. The cavity needs to be air sealed so the insulation sits behind a continuous barrier.
Do rim joists need a vapour barrier?
They need to be air sealed and protected from warm, moist indoor air reaching the cold rim. How that is achieved depends on the method used; we specify it in your quote.
Can rim joists be done in a finished basement?
Only where the cavities can be accessed — for example through a removable ceiling or during a renovation. We will tell you what is practical during the assessment.
How long does it take?
Most homes are completed in a day, depending on the length of the perimeter and access.
Why is my bonus room so cold?
Bonus rooms over garages lose heat through the floor (to the garage) and often through knee walls and the ceiling. Gaps in the floor insulation and unsealed joist cavities are the most common cause.
What is a cantilever?
A section of floor that extends past the foundation or the wall below — common under bay windows and second-floor overhangs. Its underside is exposed to outdoor air, so it needs to be sealed and insulated like an exterior wall.
Do you need to remove my garage ceiling?
Access is needed to the joist cavities. Depending on the situation we work through sections of the garage ceiling or soffit. We explain the access plan in your quote.
Will this help with garage fumes upstairs?
Air sealing the floor system is the part that limits air movement from the garage into the room above. It is included in our scope.
Can vaulted ceilings get attic rain?
Yes. Warm air leaking into the rafter cavities can freeze on the underside of the roof deck and melt during a thaw, just as it does in a conventional attic.
How much insulation fits in a vaulted ceiling?
It depends on rafter depth and whether a ventilation channel is required. We select insulation that maximises R-value for the available space.
Are pot lights a problem in vaulted ceilings?
They are one of the biggest sources of air leakage in a shallow assembly. Sealing them correctly is part of every vaulted ceiling job we do.
Can you insulate without removing the drywall?
Options are limited when the ceiling is closed. We will tell you honestly what is practical after assessing the assembly.
Do vaulted ceilings need ventilation?
Vented assemblies need a continuous air channel from soffit to ridge. Some assemblies are designed unvented; we confirm which you have before recommending a solution.
Find the cause before you spend on the fix.
Book a free on-site assessment. Thermal imaging, insulation depth, ventilation and moisture readings — with photo documentation and a fixed-price plan.
- No-obligation, fixed-price quote
- Photo report of what we find
- Lifetime warranties on our work
