Our recommendation: R-60
Calgary’s long, cold winters make the attic the biggest single opportunity to cut heat loss in most homes. We bring attics to R-60. In our inspections, attics below roughly R-50 are noticeably more prone to heat escaping upward — which also melts snow and contributes to frost and attic rain.
Why depth alone isn’t enough
Loose-fill insulation slows conducted heat, but it does not stop moving air. If warm air leaks through gaps in the ceiling — around pot lights, fans, plumbing stacks, wiring and the hatch — it passes straight through the insulation, carrying heat and moisture with it. The effective R-value drops, and moisture ends up in the attic.
Rule of thumb: air seal first, then insulate. Adding insulation over an unsealed ceiling buries the leaks and makes them harder to fix later.
What affects the depth you need
- The product. R-value per inch differs between blown-in fibreglass and cellulose, and between brands. Installers follow the product’s coverage chart.
- Settling. Some loose-fill products settle over time; the coverage chart accounts for settled depth.
- The edges. Depth near the eaves is limited by the roof slope. Baffles keep insulation out of the soffit vents while allowing as much depth as possible.
How to check your own attic
- Only enter or look into the attic if it’s safe — never step between joists or trusses.
- From the hatch, look at whether you can see the tops of the ceiling joists. If you can, the insulation is shallow.
- Look for uneven areas, bare spots near the hatch and compressed or discoloured insulation.
- In winter, look for frost on nail tips or the roof deck — a sign of air leakage.
Or let us do it: our free assessment measures depth, calculates effective R-value and uses thermal imaging to find the leaks. See attic insulation or book an assessment.
