Basement insulation in Calgary
A basement loses heat through concrete, through the rim joist and through every gap in between. We insulate the whole perimeter as a single system so the space is comfortable, efficient and dry.
- Scope
- Walls, rim joists, vapour barrier
- For
- Developments & retrofits
- Warranty
- Lifetime labour warranty
Basements need a moisture-aware approach
Concrete stays cold for long periods and can carry moisture from the soil. An insulation assembly that ignores that can trap moisture against the foundation. Before we insulate, we look for signs of water entry and make sure the assembly suits the wall.
The rim joist — where the floor framing sits on the foundation — is usually the leakiest part of a basement. We treat it as its own step rather than tucking a loose batt into the cavity, then tie the walls and rim joist into one continuous air and vapour barrier.
What an insulated basement fixes
Cold floors & walls
Lower levels that never feel warm, even with the furnace running.
Drafts at the rim
Cold air at the top of the foundation wall, often worst in corners.
Condensation
Damp spots on framing or poly where warm air meets cold concrete.
Wasted heat
An uninsulated basement drives up heating demand for the whole house.
Our basement scope
Scoped to your basement — whether it is a full development or an unfinished space.
- 01
Moisture check
A look at the foundation for signs of water entry before anything is covered.
- 02
Rim joist sealing
Every rim joist cavity air-sealed and insulated as a separate step.
- 03
Wall insulation
Framed walls insulated to the specification on your plans, fitted without gaps.
- 04
Vapour barrier
Continuous 6-mil poly with sealed laps and penetrations, ready for inspection.
Basement Insulation: common questions
Is basement insulation worth it?
For most homes, yes — especially if you are developing the space. An uninsulated basement is one of the largest sources of heat loss in a house, and the rim joist alone can account for significant air leakage.
Do I need a vapour barrier in my basement?
For framed, insulated basement walls in Alberta, a continuous vapour barrier on the warm side is standard practice and typically required for permitted developments.
What if my basement has had water in it?
Water problems should be resolved before insulating. We look for signs of moisture during the assessment and will tell you if something needs attention first.
Can you insulate just the rim joists?
Yes. Rim joists are a high-value upgrade on their own, even in an unfinished basement. See rim joist insulation.
Will you work around my basement development schedule?
Yes. We schedule insulation and vapour barrier so you are ready for your inspection and drywall on time.
Find the cause before you spend on the fix.
Book a free on-site assessment. Thermal imaging, insulation depth, ventilation and moisture readings — with photo documentation and a fixed-price plan.
- No-obligation, fixed-price quote
- Photo report of what we find
- Lifetime warranties on our work
