First, what has to be fixed
Attic rain happens when warm, humid air from the house leaks into a cold attic, freezes on the underside of the roof deck, and melts during a thaw. Three systems control whether that happens:
- The air barrier — the sealed ceiling plane (vapour barrier, plus seals at pot lights, fans, plumbing, wiring, top plates and the hatch).
- Insulation — enough depth, evenly installed, to keep the attic cold.
- Ventilation — balanced intake and exhaust to remove the moisture that does get in.
Any repair should be judged by how well it addresses all three, starting with the air barrier, because that is where the moisture comes from.
The four common approaches
| Approach | What it does | Where it falls short |
|---|---|---|
| Add more roof vents | Increases exhaust ventilation. | Does not stop air leaking in. Without matching intake, extra exhaust can draw more indoor air into the attic. |
| Top up insulation | Adds depth over the existing ceiling. | Buries the leaks instead of sealing them. Can hide the problem for a season and makes a proper repair more expensive later. |
| Spray-foam “hybrid” system | Removes existing insulation, sprays closed-cell foam over the ceiling as a new air and vapour barrier, then blows loose-fill on top. | Addresses the air barrier comprehensively, but involves full removal and is typically a larger, more invasive job. Ventilation still needs to be balanced. |
| Targeted air-seal repair | Seals every bypass and penetration with sealant and foam, removes damaged insulation, restores R-value, and balances ventilation. | Requires a thorough inspection to find every leak — which is why thermal imaging matters. |
How we approach it
We use the targeted approach: a 4-point inspection (thermal imaging, insulation depth, ventilation audit, moisture readings) to find where air is leaking, then precision air sealing, insulation correction to our R-60 target, ventilation balancing, and remediation of any moisture damage. Because it corrects all three systems, we back it with a lifetime warranty against attic rain.
The test for any quote: ask exactly how it stops warm air entering the attic. If the answer is “more vents” or “more insulation” alone, expect the problem to return.
Questions to ask any contractor
- Will you inspect with a thermal camera and show me where the air leaks are?
- Which penetrations will you seal, and with what?
- Will you check that bathroom and kitchen exhaust ducts terminate outside?
- What R-value will the attic have when you are finished?
- What exactly does your warranty cover — and for how long?
Seeing the signs now? Read about attic rain symptoms or book a free assessment.
